American-expedition-vehicles JK High Steer Kit Manuel d'utilisateur télécharger pdf (Page 7)

Washer

Free Nut

Spacer

Steering Damper

Washer Lock Nut

40 ft/lbs

Figure 7

VIII. SHOCK DOUBLER BRACKETS

1. Remove shocks at lower mount.

2. Install Shock Doubler brackets on both sides as shown using supplied hardware (Fig. 8).

3. Install shocks in Shock Doubler brackets as shown using supplied hardware (Fig. 8).

Torque to 22 ft/lbs

NOTE: The front hole on the

right side bracket will need to be

drilled out to 3/8”

Torque to 56 ft/lbs

NOTE: Use a 3/8” drill bit or the

provided self-tapping bolt to

enlarge the factory hole.

Torque to 22 ft/lbs

Figure 8

1 2 3 4 5 6 7 8 9

Pas de commentaire

American-expedition-vehicles JK High Steer Kit Manuel d'utilisateur Page 7