American-expedition-vehicles JK Premium Front Bumper Manuel d'utilisateur télécharger pdf (Page 3)

I. Remove factory components

A. Remove the factory air dam

1. Remove the “Scrivet” fasteners at the front and back side of the air dam. Use a Phillips screwdriver

to back out the plastic pin and pull out the fastener. The pin will tend to spin. Use a at screwdriver

under the base of the fastener to apply pressure as you turn the screw. Do not discard these fasten-

ers. You will re-use two of them later on.

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

American-expedition-vehicles JK Premium Front Bumper Manuel d'utilisateur Page 3