American-expedition-vehicles JK Hemi Builder Kit - Installation Guide for 07-11 Manuel d'utilisateur télécharger pdf (Page 33)

f. heater hoses

Cut the stock 3.8L hoses as shown (g. 8a) keeping the center sections. Fit these sections to the

completed powertrain before mating the body to the chassis (g. 8b.)

g. 8a

g. 8b

g. evaporative purge valve hoses

1. Reuse the stock 3.8L hose from the fuel tank to the purge valve. Attach this line to the fuel line us-

ing the stock bracket and a couple zip ties.

2. Use Mopar part #4578627AA hose to go from the intake, around the engine to the purge valve.

This hose doesn’t quite go all the way to the purge valve; you will need to use a portion of the stock

3.8L purge valve line from the purge valve to the engine.

1 2 ... 28 29 30 31 32 33 34 35 36

Pas de commentaire

American-expedition-vehicles JK Hemi Builder Kit - Installation Guide for 07-11 Manuel d'utilisateur Page 33