American-expedition-vehicles JK HEMI Builder Kit - Installation Guide for 12+ J Manuel d'utilisateur télécharger pdf (Page 25)

9. Install the cooling module back into the body. Notice the positioning of steering cooler lines shown in

Figure 34..

Figure 34

10. Install the fan assembly onto the back of the radiator using the factory hardware.

11. Trim and install the upper radiator shroud. Also remove the factory decal on the upper shroud and

install the supplied AEV decal (g 35).

Figure 35

12. Modify wiring at re wall as shown (g 36).

Figure 36

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 36 37

Pas de commentaire

American-expedition-vehicles JK HEMI Builder Kit - Installation Guide for 12+ J Manuel d'utilisateur Page 25