American-expedition-vehicles JK Rear Bumper/Tire Carrier Manuel d'utilisateur télécharger pdf (Page 6)

ii. installation of the aev tire carrier

with or without the aev rear bumper

(if installing aev rear bumper only proceed to page 12)

A. INSTALL THE AEV TAILGATE BRACKET

1. Install the AEV Tailgate Bracket using the four factory bolts from the stock tire carrier. Install the

bracket so that it is centered both vertically and horizontally on the bolt holes. The easiest way to do

this is to install two bolts hand tight at rst, adjust the bracket and install and tighten all the bolts.

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

Pas de commentaire

American-expedition-vehicles JK Rear Bumper/Tire Carrier Manuel d'utilisateur Page 6